ALPINE MRV-V500

Κωδικός: MRV-V500

Κατασκευαστής: ALPINE

Τιμή: 350.00€

Διαθεσιμότητα: Παράδοση σε 1-4 μέρες

buy
Αγόρασε το

5 Channel V-Power Digital Amplifier

Overview

  • 60W x 4 + 250W x1 RMS (2Ω, 14V, ≤1% THD+N)
  • 40W x 4 + 150W x1 RMS (4Ω, 14.4V, ≤1% THD+N)
  • Same power in a 40% smaller chassis
  • Evolution to Class D digital platform
  • New snap-on terminal covers for easy installation

 

Features and Specification

SPECIFICATIONS

CEA-2006 Power Ratings

  • CEA-2006 Power Rating: 40W x 4 + 150 x 1 RMS (4-ohm, 14.4V at <1% THD+N)
RMS Power Ratings
  • Per channel into 4 Ohms: 40W x 4 + 150 x 1 RMS(14.4V at <1% THD+N)
  • Per channel into 2 Ohms: 60W x 4 + 1 x 250 RMS (14.4V at <1% THD+N)
Sound Tuning
  • Crossover Frequency (CH1/2/3/4, LPF): 50 - 400 Hz, -24dB/oct.
  • Crossover Frequency (CH1/2/3/4, HPF): 50 - 400 Hz, -24dB/oct.
  • Crossover Frequency (Subwoofer, LPF): 50 - 400 Hz, -24dB/oct.
  • EQ (Equalizer): 0 to +12dB, fc=50Hz
Dimensions
  • Foot Print (WxHxD) mm: 200 x 55 x 200 mm
  • Foot Print (WxHxD) in: 9-3/4'' x 2-1/4'' x 8-5/8''
  • Heat Sink (WxHxD) mm: 244.5 x 55 x 219 mm
General
  • Power Requirements: 14.4 V.DC (11-16V allowable)
  • Input Sensitivity (RCA Input): 0.2 - 4.0 V
  • Input Sensitivity (Speaker Level Input): 0.5 - 10 V
  • Input Impedance: >10k ohms
  • THD+N (Rated Power into 4 Ohms) for Subwoofer:
  • THD+N (10W into 4 Ohms): ≤0.02 %
  • THD+N (10W into 2 Ohms): ≤0.03 %
  • THD+N (Rated Power into 4 Ohms): ≤0.07 %
  • THD+N (Rated Power into 2 Ohms): ≤0.09 %
  • Damping Factor (10W into 4 Ohms at 100Hz): >90 (Ch 1-4), >500 (Subwoofer)
  • Signal to Noise (1W into 4 Ohms): >81 dB
  • Signal to Noise (Rated Power into 4 Ohms): >98 dB
  • Remote Level: -20 to 0 dB

FEATURES

Install

  • Terminal Layout: Two-Sided
  • Screw Mount / Wire Cover: Integrated Wire and Mounting Screw Terminals
General
  • Amplifier Type: Class-D (Digital)
  • Channel Design: 5 Channel
  • Power Supply Design: DC-DC PWM Power Supply
  • Pre-Amp Stage: Discrete
  • Final Outputs: Power MOSFET
  • Crossover: Variable Lowpass & Highpass Filter
  • Gain Control: Continuously Adjustable Gain Control
  • Bass EQ: Bass EQ Function
  • Remote Turn On: Remote Sensing Function (for RCA Input & Speaker Input)
  • Current Protection: Over-Current, Over-Voltage, Under-Voltage and Thermal Protection
  • Board Circuitry: S.T.A.R. Circuit
  • Speaker-Level Inputs: 4-channel Speaker Level Inputs
  • Power Indicator: Top Mounted Blue LED Power Indicator
  • Thermal Control: Multi-stage Power Limits
  • Power Supply: MOSFET

Documents